Installing the cd/dvd/floppy drives
In this step I will install the DVD Burner, DVD Drive and a floppy drive. Again, as always, I have to unpack the items and check them for visual defects.
* The first thing I will do is start installing the two DVD drives. I need to slide the drives into the appropriate slots in the computer case and secure them using four screws.
Sliding the first DVD drive into a slot
Securing the First DVD drive to the case using the four screws
* The same procedure will be used as I install the second DVD drive.
Installing the second drive
* Next I have to install the SATA power cables from the power supply and the SATA connectors from the motherboard.
SATA Power Connectors
SATA Cables being Connected
* Note: I ended up moving the DVD drives down one slot each so I will have extra space because the power supply cables are so long. Again, this is only a mid atx case and I will have more room when I expand to a full case.
* I will again repeat the procedure to install the final drive, which is the floppy drive. I will slide it into the appropriate slot and secure it to the case with the mounting screws. Then I will need to install the floppy drive cable and floppy drive power connector.
floppy drive cables floppy drive floppy drive cable
Floppy drive installed
0 comments:
Post a Comment
Learn the Computer.